Stuart Marine Corp.

Removable V-berth Installation 1. Remove the compression post if it has been previously installed 2. Rough fit all three v-berth panels, resting them on the forward half bulkhead and the longitudinal upper teak slats of the port and starboard storage bins. Trim the three panels as necessary to create one level and flat surface – the two aft removable panels will fit first, then fit the single forward fixed panel 3. Install the two butt hinges on the forward edge of the forward fixed panel. Measure in 6” towards the centerline from the outboard edges of the panel. Install the hinges against the forward crash bulkhead. 4. Install the two 8” teak support cleats on the forward sides of the centerboard trunk cap 5. Install the two 6” teak support cleats on the forward faces of the seat boxes 6. Avoid interference with the three panels and the trunk cap, bilge pump, and battery box 7. Use silicone sealant as a bedding compound for increased bonding between the cleats and hinges and the fiberglass surfaces

Creates a proper bonding and grounding system using a Dynaplate grounding shoe to reduce the risk of serious hull damage and electrical shock associated with a boat lightning strike. Our proper bonding and grounding system using the Dynaplate shoe will help provide a direct, controlled high-capacity path for lightning dissipation.

Includes pattern

Includes pattern

Custom designed and hand built of 7/8" stainless steel tubing welded at all joints and fittings

Custom designed and hand built of 7/8" stainless steel tubing welded at all joints and fittings

Custom designed and hand built of 7/8" stainless steel tubing welded at all joints and fittings

Custom designed and hand built of 7/8" stainless steel tubing welded at all joints and fittings

Custom designed and hand built of 7/8" stainless steel tubing welded at all joints and fittings

Custom designed and hand built of 7/8" stainless steel tubing welded at all joints and fittings

The Wind scoop Ventilating Sail puts an end to hot, stuffy cabins. The Wind scoop is designed to force the slightest breeze into the cabin to keep it cool and comfortable. The Wind scoop has no tie-downs and will follow variable winds. Each Wind scoop is packed in its own protective nylon storage bag. The colors will vary.

This durable toilet is sanitary, odorless and leakproof. The high-gloss finish is easy to clean; the piston pump flushes fresh water to clean the bowl; the pour spout will not splash back; the seat and cover are removeable for easy cleaning; the sealed valves keep the odor in the tank; a built-in deodorant storage bottle is included; the hold down kit secures the toilet to the deck; and there's an easy to read tank level indicator.